卷扬式启闭机的操作规程

发布时间:2022-01-16 04:06 阅读次数:
1.工程施工单位,要将启闭机应安装在平整坚实、视野良好的地基之上,机身和地锚必须牢固。要求启闭机与导向滑轮中心线应垂直对正,启闭机距离滑轮一般应不小于十五米。
1. The engineering construction unit should install the hoist on a solid, well-equipped foundation, the fuselage and the anchor must be firm. The center line of the opening and closing machine and the guide pulley should be perpendicular to the positive, and the distance pulley should be no less than 15 meters.
 
 
2.在调装作业前,应检查钢丝绳、离合器、制动器、保险棘轮,传动滑轮等,确定安全可靠,方可操作。钢丝绳在卷筒上必须排列整齐,作业中最少需保留三圈。在作业时,不准有人跨越启闭机的钢丝绳经防止出现意外。
2. Before adjusting the operation, check the wire rope, clutch, brake, insurance ratchet, driving pulley, etc., to ensure safe and reliable operation. The wire rope must be arranged neatly on the drum, and the minimum number of assignments should be kept at least three times. During homework, no one is allowed to cross the wire rope of the open and closing machine to prevent accidents.
 
 
3.在吊运重物需在空中停留时,除使用制动器外,并应用棘轮保险卡牢。操作时,严禁擅自离开岗位。
3. When hanging heavy objects in the air, except using the brake, use a ratchet safe. When operating, do not leave the post without permission.
 
 
4.工作中要听从指挥人员的信号,信号不明或可能引起事故时,应暂停操作,待弄清情况后方可继续作业。作业中突然停电,应立即拉开闸刀,并将运送物件放下。
在线客服 联系方式 二维码

电话

020-88888888

扫一扫,关注我们